SSH tunnelling is used to create an encrypted connection over an untrusted network. It consists of an encrypted tunnel created through an SSH protocol, providing secure connections for data transfer. The SSH Tunnel can be used to establish sort of a virtual private network (VPN) to access services across firewalls.
This is the procedure to establish a basic SSH Tunnel to reach a remote machine.
Create an SSH tunnel
To create an SSH tunnel, local connections through a specified port must be forwarded to an SSH server.
To create an SSH tunnel a given port of one machine needs to be forwarded to a port on the other machine which will be the other end of the tunnel. Once the SSH tunnel has been established, the user can connect to earlier specified port at first machine to access the network service.
Create an SSH Tunnel entry.Set up the properties as follows:
SSH server settings
Option
Description
Host
Set the IP address of the SSH Server. (please refer to 1 in the Tunnel diagram)
Port
Set the port of the SSH Server. The default port is 22. (please refer to in the Tunnel diagram)
Set public key
Setup the public key
Username
Enter the SSH server username to connect.
Password
Enter the SSH server password to connect.
Outgoing tunnel settings
Option
Description
Mode
Select between: Local, Remote or Dynamic
Local address
The local address must be left to 127.0.0.1. (please refer to 1 in the Tunnel diagram)
Local port
In most cases leave the local port to its default value 3390. (please refer to ‚ in the Tunnel diagram)
Remote host
Enter the host or IP address of your remote client. (please refer to … in the Tunnel diagram)
Remote port
Set the final port that you must reach, in most cases leave it to its default value 3389. (please refer to † in the Tunnel diagram)
At this time, you can launch your entry to see if indeed the tunnel has been opened successfully. Close the session.
Create your remote session
Create an RDP session.
Option
Description
Host
Enter your Local address which is 127.0.0.1. (please refer to 1 in the Tunnel diagram)
Port
Enter your Local port which is 3390. (please refer to ‚ in the Tunnel diagram)
RDP type
Leave the RDP type to Normal.
Username
Enter the username of your Remote Host.
Domain
Enter the domain of your Remote Host.
Password
Enter the password of your Remote Host.
In the VPN/SSH/Gateway side menu of your RDP session select Always connect in the Open field and Session in the Type field.In the VPN – Settings tab, click on the drop down list next to Session and select your SSH Tunnel entry previously created.You now have configured your session with the following rule: for each connection that comes on interface 127.0.0.1 and port 3390, forward that connection to the SSH server and request the server to forward that connection to your Remote host.
You can now launch your RDP session, your SSH Tunnel will open, establish the connection and then launch and open your RDP session.
Give us Feedback