Configure an Azure Bastion entry in Remote Desktop Manager

Microsoft Azure Bastion is a comprehensive, fully managed service providing both Remote Desktop Protocol (RDP) and Secure Shell Protocol (SSH) access to Azure virtual machines (VMs) without their public IP exposure. An hourly billed service, Azure Bastion is tied to a specific Azure Virtual Network, allowing access to all VMs contained within.

Remote Desktop Manager allows seamless connection to Azure Bastion instances through a VPN/SSH/Gateway entry either per connection or shared amongst many. Once Azure Bastion is provisioned, add the necessary details to Remote Desktop Manager, authenticate to Azure, and connect to any VMs within the given Azure virtual network.

Provisioning Azure Bastion for an Azure Virtual Network

Before creating entries in Remote Desktop Manager, some steps are required for provisioning in your Azure Portal.

1. Open your Microsoft Azure Portal and sign in to your account.

2. Select Virtual Networks in the Azure services section. If you do not see it, click on More services to make other services appear.

   

3. Click on a specific virtual network to add Bastion to (or create one).

4. In the left menu, go to the Bastion pane to open the details, then click the Deploy Bastion button to start the process.

   

   If there is no existing subnet with enough space, then Bastion only shows the Configure manually button and prompts for the subnet creation. In the image below, subnet 172.16.2.0/24 was provided, and the Deploy Bastion button becomes enabled once the subnet is added.

   This is a multi-step process, which can take 10 minutes or more to complete.

   • Creates a subnet named AzureBastionSubnet.
   • Creates a resource for Azure Bastion - {Existing Virtual Network}-bastion.
   • Deploys at least one Bastion application instance.
   • Provisions a public IP tied to the Azure Bastion resource.

5. Once Azure Bastion is provisioned, navigate to the Bastion pane once again.

6. Select an available VM to connect to.

   

7. Enter appropriate local VM credentials under Connection Settings.

   

8. Click on Connect. Once connected, a new browser tab opens and shows the connection.

9. Still in the Azure Portal, navigate to the {Existing Virtual Network}-bastion resource.

10. In the left menu, click the Configuration pane.

11. Select the Standard tier and enable the Native client support (disabled by default).

    By default, Azure Bastion provisions the Basic tier, which does not allow for Native Client Support, which Remote Desktop Manager relies on.

    

12. Save the configuration and allow time to complete the upgrade and feature changes.

    Once you have upgraded, you can no longer downgrade. Therefore, make sure you intend to do so, and be aware of the associated price increase.

Connecting Remote Desktop Manager to Azure Bastion

With Azure Bastion now configured, you can now configure Remote Desktop Manager to connect to VMs behind Azure Bastion.

1. Before connecting, locate the following property details:

   • Host
   • Subscription ID (assumed to be the same as the Azure Bastion Host, in which case it can be omitted)
   • Resource Group (assumed to be the same as the Azure Bastion Host, in which case it can be omitted)
   • Tenant ID (only needed if it is not the default tenant for the Azure user)

   For more information, see this table:

   Property	Example value	Notes
   Host	Devolutions-202309011056-vnet-bastion	This value is derived from {Existing Virtual Network}-bastion and is not the provided Public DNS or Public IP value found in the resource information.
   Subscription ID	6f14d593-b33a-48ca-81es-428eeb0ff8b1	Locate this value by navigating to Subscriptions. Then, select your specific subscription and copy the Subscription ID value.
   Resource Group	Devolutions-202309011056	It is the Resource Group that the Virtual Network and attached Bastion object is located in.
   Tenant ID	76377918-3e78-4fd7-b07a-6eb5d4bbf18f	Either click the “…” button next to the Tenant ID in Remote Desktop Manager to populate the field or manually locate this value by navigating to Azure Active Directory, choosing the Properties tab, and copying the Tenant ID value.

2. With details in hand, open Remote Desktop Manager and navigate to where you want your Azure Bastion entry to be.

3. In the Ribbon, go to the Edit tab and click on the "+" symbol to add a new entry.

   

4. Under the VPN/SSH/Gateway entry types, select Azure Bastion and click OK.

   

5. Name your entry.

6. In the General sub-tab, enter the information located in step 1 for the Host, Subscription ID, Resource Group, and Tenant ID.

7. Select an Azure cloud in the corresponding drop-down list. The Default value corresponds to Azure Public Cloud.

8. Select a Connection mode in the corresponding drop-down list. Choose between:

   • RD Gateway: Retrives an RDP connection file from the Bastion and uses it in the background for faster performance. Supports RDP session entries only.
   • TCP Tunnel: Allows unique port numbers but offers lower performance. Only available with the Standard tier. Supports non-standard ports and SSH entries. This mode mirrors the functionality of the az cli Bastion tunnel command.

   

9. Open the Authentication sub-tab and select the appropriate value:

   • Use "My Account Settings": Takes your credentials from File – My Account Settings.
   • Use my current PowerShell login: Takes the current login context from Azure PowerShell (Connect-AzAccount).
   • Use my current Azure CLI login: Takes the current login context from Az CLI (az login).
   • Prompt for credentials: Prompts with an interactive login to authenticate via a web browser pop-up window. You can optionally provide the username as a login hint. The access token will be cached for subsequent connections in the same user session.
     In the example below, the connection is set to prompt with an Azure login screen and an optional login hint is provided to select the right account.

   

10. Click OK to save the entry.

11. In the Ribbon, go to the Edit tab and click on the "+" symbol again to add another entry.

    

12. Under the Session entry types, select either RDP (Microsoft Remote Desktop) or SSH Shell and click OK. For this example, an RDP session entry has been used.

    

13. Name your entry.

14. In the General tab, enter the VM name that is within Azure in the Host field.

15. Enter the VM Username and Password to log in to the VM itself.

    This VM is not yet domain-joined, so the domain field is left empty.

    

16. In the left menu, navigate to the RDP connection's VPN/SSH/Gateway screen.

17. In the VPN/SSH/Gateway tab, under General, select Always connect in the Connect drop-down list.

    

18. In the Type drop-down list, select Azure Bastion.

    

19. Click the ellipsis button next to the Type option.

    

20. Choose Existing in the left menu, then find the existing pre-created Azure Bastion entry.

    

21. Click OK twice to close the connection editing windows.

22. Launch a connection to the newly added VM.

    For interactive authentication, and particularly if your credentials are not yet cached, you will encounter a Microsoft sign-in prompt to authenticate against the Azure portal. Enter your Azure credentials to open the Azure Bastion connection and connect to the requested VM.

    

Your connection should now be open.