Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

SSH key dashboard

This article details the many settings and options available for SSH key dashboard session entries in Remote Desktop Manager.

SETTINGS

DESCRIPTION

Name

The name of the entry.

Folder

The folder where the entry is located.

Display

How the entry opens:

  • Embedded (tabbed) — Opens the entry in a tab of the main window.

  • Undocked — Opens the entry in a separate window. Additional lists let you choose the monitor and the virtual desktop where the window opens.

On Linux, the list also offers Default (inherited), which uses the display mode of the nearest parent folder that sets one, otherwise the default of the entry type. The mode it resolves to is shown next to the list.

Host

Where the host of the entry comes from. Host configured uses the Host entered in the General tab. Linked (vault) uses a host entry from a vault. Inherited uses the host of a parent folder. Linked (user vault) uses a host entry from the user vault and is offered only in the user vault.

Credentials

How the credentials of the entry are provided. Select a credential mode from the list.

General

SETTINGS
DESCRIPTION

Host

The host name or IP address of the SSH server whose authorized keys are managed. This field is required unless the host comes from a linked or inherited host, in which case it is disabled. When the field is empty, the entry name is copied into it.

Port

The port of the SSH server. The default port is 22.

Username

The username used to connect to the SSH server. This field is disabled when the credentials come from another source than the entry itself.

Password

The password used to connect to the SSH server. This field is disabled when the credentials come from another source than the entry itself, when Always ask for password is enabled, or when the Disable password saving in vaults system setting is enabled.

Always ask for password

Prompt for the password each time the entry is opened instead of saving it in the entry. This option is disabled when the credentials come from another source than the entry itself.

Use smart card

Use a smart card to authenticate. Enables the Certificate method and PIN code fields.

Certificate method

How the certificate is read from the smart card. Available when Use smart card is enabled:

  • CAPI

  • PKCS

  • Try all modes

PIN code

The PIN code of the smart card. Available when Use smart card is enabled.

SSH key

The SSH key tab contains a Key tab and a Certificate tab.

Key

SETTINGS
DESCRIPTION

Private key

Where the private key comes from. The options offered depend on the data source and on system settings, for example:

  • No private key — No private key is used.

  • File (local) — Uses a private key file stored on the local computer.

  • Embedded data — Stores the private key data in the entry.

  • Linked (vault) — Uses the private key of another entry of the vault.

  • Linked (cross vault) — Uses the private key of an entry from another vault, selected in the Vault field.

  • My personal SSH key — Uses the personal SSH key configured for the current user. Click the Edit button next to the list to edit it.

Vault

The vault that contains the linked private key entry. Shown when Linked (cross vault) is selected.

Entry

The entry that contains the private key. Shown for linked private keys. Use the buttons in the field to browse for an entry, add a private key entry, or clear the selection.

Search string

The search string used to find the private key entry in the user vault. Shown when the private key is found by a search string.

File

The path of the private key file. Shown when File (local) is selected.

Passphrase

The passphrase of the private key. Shown when File (local) or Embedded data is selected, and disabled when Always prompt for passphrase is enabled.

Always prompt for passphrase

Prompt for the passphrase each time the private key is used instead of saving it in the entry. Shown when File (local) or Embedded data is selected.

Private key data

The private key data stored in the entry. Shown when Embedded data is selected. Use the buttons above the field to generate a key, view the data, paste it from the clipboard, browse for a key file, or clear the data.

Certificate

The Certificate tab is shown when a private key is selected and is either a File (local) or Embedded data key, or when a certificate is already configured.

SETTINGS
DESCRIPTION

Certificate type

Where the SSH certificate comes from:

  • No certificate

  • File (local)

  • Embedded data

When the private key comes from another entry, an information icon indicates that a certificate configured on that linked SSH credential takes priority over the certificate specified here.

File

The path of the certificate file. Available when Certificate type is File (local).

Certificate

The certificate data stored in the entry. Shown when Certificate type is Embedded data. Use the buttons above the field to view the data, clear it, paste it from the clipboard, or browse for a certificate file.

Proxy

SETTINGS
DESCRIPTION

Proxy mode

How the connection goes through a proxy:

  • None — No proxy is used.

  • Link — Uses the proxy settings of another entry, selected in the Proxy field.

  • Custom — Uses the proxy settings configured in this tab.

Proxy

The entry that provides the proxy settings. Shown when Proxy mode is Link.

Proxy type

The type of proxy. Shown when Proxy mode is Custom:

  • Socks4

  • Socks5

  • HTTP

  • Local

Telnet is also listed for an entry that already uses it.

Host

The host name or IP address of the proxy, and its Port. Not shown for a Local proxy.

Credential mode

How the proxy credentials are provided. The options offered depend on the vault and the data source, for example:

  • Username and password — Uses the Username and Password entered in this tab.

  • Linked (vault) — Uses a credential entry of the vault, selected in the Credential field.

  • My personal credentials

  • Linked (user vault) — Uses a credential entry of the user vault, selected in the Credential field. Offered only in the user vault.

  • Find by name (user vault) — Finds the credential entry in the user vault by the name entered in the field below the list. Not offered in the user vault.

  • My privileged account

For My personal credentials and My privileged account, a button next to the list opens My account settings.

Credential

The credential entry that provides the proxy credentials. Shown when Credential mode is Linked (vault) or Linked (user vault).

Username

The username used to authenticate on the proxy. Shown when Credential mode is Username and password.

Password

The password used to authenticate on the proxy. Disabled when Always ask for password is enabled.

Always ask for password

Prompt for the proxy password each time the entry is opened instead of saving it in the entry.

Excluded hosts

The hosts that are reached directly instead of through the proxy. Not shown for a Local proxy.

Consider proxying localhost connections

Send connections to the local computer through the proxy as well. Not shown for a Local proxy.

DNS name lookup at the proxy end

Whether host names are resolved by the proxy. Not shown for a Local proxy:

  • Automatic

  • Yes

  • No

SSH gateway

SETTINGS
DESCRIPTION

Gateway mode

How the connection goes through SSH gateways:

  • None — No SSH gateway is used.

  • Custom — Uses the list of SSH gateways shown below the list, with the Host and Port of each gateway. Use the New, Edit, and Delete buttons to manage the gateways, and the up and down arrow buttons to change their order.

  • Linked — Uses the SSH gateway of another entry, selected in the Gateway field.

Gateway

The entry that provides the SSH gateway. Shown when Gateway mode is Linked.

Logs

SETTINGS
DESCRIPTION

Enable logging

Write the session output to a log file. Disabled when Log into terminal is enabled.

Log path type

Where the log file is written. Available when Enable logging is enabled and Log into terminal is cleared:

  • Custom — Writes the log to the file set in Log path.

  • Global — Writes the log to the file named in Log filename, in the default log path set in the application settings.

Log path

The full path of the log file. Shown when Log path type is Custom, and available when Enable logging is enabled.

Log filename

The name of the log file. Shown when Log path type is Global, and available when Enable logging is enabled. An information icon next to the field reminds you to set the default log path in the application settings.

Log mode

What is written to the log file. Available when Enable logging is enabled:

  • Event

  • Printable output

Log overwrite mode

What happens when the log file already exists. Available when Enable logging is enabled and Log mode is Printable output:

  • Default — Uses the mode set in the application settings. The item shows that mode in parentheses, for example Default (Prompt).

  • Prompt

  • Append

  • Overwrite

Verbose

The level of detail of the log, from 0 to 4.

Log into terminal

Display the log in the terminal instead of writing it to a file.

See also

Last updated

Was this helpful?