For the complete documentation index, see llms.txt. This page is also available as Markdown.

SonicWall VPN and SonicWall NetExtender

Remote Desktop Manager boasts two distinct SonicWall integrations: SonicWall Global VPN Client and SonicWall NetExtender. The former lets users launch and automate SonicWall VPN connections and the latter provides a secure alternative for SSL VPN tunnels. Both entries are created from the VPN/tunnel/gateway category of the New entry dialog.

SETTINGS

DESCRIPTION

Name

The name of the entry.

Folder

The folder where the entry is located.

Display

How the entry opens. This entry type only supports External, so the display mode cannot be changed.

Credentials

The source of the credentials the entry uses.

VPN type

The VPN client the entry uses. Set to SonicWall Global VPN Client or SonicWall NetExtender. The Connection tab shows the settings of the selected client.

SonicWall Global VPN Client

The SonicWall Global VPN Client entry can store credentials and pass them directly to the SonicWall VPN client to avoid manual management. The entry works with all connection types supported in Remote Desktop Manager.

Connection

SETTINGS
DESCRIPTION

Profile

Enter the name of your SonicWall profile.

Host

Enter the SonicWall server. Shown only on macOS.

Username

Enter your SonicWall account username. Unavailable when the credentials come from a source other than the entry itself.

Password

Enter your SonicWall account password. Unavailable when the credentials come from a source other than the entry itself, or when the Disable password saving in vaults system setting is enabled.

Realm

Enter the SonicWall realm. Shown only on macOS.

Domain

Enter the SonicWall domain. Shown only on macOS.

Wait time (sec)

The number of seconds (0 to 1000) Remote Desktop Manager waits after starting the SonicWall client to open or close the VPN.

SonicWall NetExtender

The SonicWall NetExtender entry provides an alternative for teams using both the standard SonicWall client and NetExtender in different environments.

Connection

SETTINGS
DESCRIPTION

Name

Enter a custom name for your connection. If left empty, the SonicWall NetExtender connection will be named after this entry.

Host

Enter the SonicWall NetExtender host. This field is required.

Username

Enter your SonicWall account username. Unavailable when the credentials come from a source other than the entry itself.

Domain

Input your SonicWall NetExtender domain name.

Password

Enter your SonicWall account password. Unavailable when Always ask for password is selected.

Always ask for password

When checked, prompts the user for a password upon launching the entry. Unavailable when the credentials come from a source other than the entry itself.

Initial delay (seconds)

The number of seconds (0 to 300) Remote Desktop Manager waits after starting the NetExtender connection.

Automatically delete profile on close

Delete the NetExtender connection profile when the VPN closes.

Automatically accept certificate

Force Remote Desktop Manager to trust the VPN server's certificate without asking each time.

Timeout (seconds)

The number of seconds (15 to 30) to wait for the connection to be created when the certificate is accepted automatically. Shown when Automatically accept certificate is selected.

Advanced

Both entries share the settings of the Advanced tab.

SETTINGS
DESCRIPTION

Go offline on connection

Render Remote Desktop Manager offline upon connecting to the VPN.

Close connection after (min)

Set a delay (0 to 4320 minutes) after which the VPN automatically disconnects. The number of minutes can be set when the checkbox is selected.

Detect reachable host in wait

Detect reachable host while waiting. If enabled, this setting helps quicken connection attempts.

VPN reconnect mode

Choose a reconnect mode between:

  • Default — uses the VPN reconnect mode defined in File – Settings – Entry types – VPN/tunnel/gateway.

  • Reconnect VPN — automatically attempts to reconnect when the connection is disrupted.

  • Leave VPN open — leaves the VPN open regardless of connectivity.

Go online on disconnect after (sec)

Set a delay (0 to 180 seconds) after which Remote Desktop Manager goes online after the VPN has been disconnected.

Use adapter to detect connection

Use a network adapter to detect whether the VPN connection is open.

After execution, wait

Defines how Remote Desktop Manager waits after starting the VPN:

  • Delay — waits for the set number of seconds (-1 to 180).

  • For IP on adapter — waits for an IP address on the network adapter entered in the adapter field (adapter name, device name, or blank). Wait a maximum of sets the maximum wait in seconds (-1 to 180), and Then delay adds a delay in milliseconds (-1 to 180000) once the IP address is detected.

Commands

The list of VPN commands, with their Name, After connection command, and Before disconnecting command. Use the toolbar to Add, Edit, Delete, Move up, or Move down a command. Available when After execution, wait is set to For IP on adapter. Not supported on macOS.

After connecting, VPN command enabled

Runs the after connection commands once the VPN connects. Available when After execution, wait is set to For IP on adapter.

Before disconnecting, VPN command enabled

Runs the before disconnecting commands before the VPN disconnects. Available when After execution, wait is set to For IP on adapter.

Run routes in batch (forces elevated privileges)

Runs the route commands in a batch, which requires elevated privileges. Available when After execution, wait is set to For IP on adapter.

Last updated

Was this helpful?