> For the complete documentation index, see [llms.txt](https://docs.devolutions.net/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.devolutions.net/rdm/knowledge-base/knowledge-base-articles/entry-settings/ip-address-list.md).

# IP address list

Configure the IP address list data entry in Remote Desktop Manager to keep a manual list of IPs and hosts or build one from vault entries.

This article details the many settings and options available for ***IP address list*** data entries in Remote Desktop Manager.

{% hint style="info" %}
The ***Mode*** setting determines which settings are shown. ***Manual*** shows the list of IP addresses and its toolbar. ***Dynamic*** shows the filters that build the list from the entries of the vault.
{% endhint %}

<table data-header-hidden><thead><tr><th width="200"></th><th></th></tr></thead><tbody><tr><td><strong>SETTINGS</strong></td><td><strong>DESCRIPTION</strong></td></tr><tr><td><strong>Name</strong></td><td>The name of the entry. This field is required.</td></tr><tr><td><strong>Folder</strong></td><td>The folder where the entry is located.</td></tr><tr><td><strong>Display</strong></td><td><p>How the entry opens:</p><ul><li><strong>Embedded (tabbed)</strong> — Opens the entry in a tab of the main window.</li><li><strong>Undocked</strong> — Opens the entry in a separate window. Additional lists let you choose the monitor and the virtual desktop where the window opens.</li></ul><p>On Linux, the list also offers <em><strong>Default (inherited)</strong></em>, which uses the display mode of the nearest parent folder that sets one, otherwise the default of the entry type. The mode it resolves to is shown next to the list.</p></td></tr></tbody></table>

### General

<table><thead><tr><th width="220">SETTINGS</th><th>DESCRIPTION</th></tr></thead><tbody><tr><td><strong>Mode</strong></td><td><p>Choose how the list is built:</p><ul><li><strong>Manual</strong> — You add, edit, and remove the IP addresses yourself.</li><li><strong>Dynamic</strong> — The list is built from the hosts of the entries in the vault, filtered by the settings below. A dynamic list is read-only.</li></ul></td></tr></tbody></table>

**Manual**

<table><thead><tr><th width="220">SETTINGS</th><th>DESCRIPTION</th></tr></thead><tbody><tr><td><strong>View</strong></td><td>Open the selected IP address in read-only mode.</td></tr><tr><td><strong>Add</strong></td><td>Add an IP address to the list. The <em><strong>Information - IP/Host</strong></em> window opens.</td></tr><tr><td><strong>Edit</strong></td><td>Modify the selected IP address in the <em><strong>Information - IP/Host</strong></em> window. Available when a single item is selected.</td></tr><tr><td><strong>Batch edit</strong></td><td>Modify several selected IP addresses at once. Replaces <em><strong>Edit</strong></em> when more than one item is selected.</td></tr><tr><td><strong>Delete</strong></td><td>Remove the selected IP addresses from the list.</td></tr><tr><td><strong>Duplicate</strong></td><td>Create a copy of the selected IP address and open it in the <em><strong>Information - IP/Host</strong></em> window. Available when a single item is selected.</td></tr><tr><td><strong>Simple / Advanced</strong></td><td><p>Use the list in the toolbar to choose which columns the list shows:</p><ul><li><strong>Simple</strong> — <em><strong>Name</strong></em>, <em><strong>Host</strong></em>, <em><strong>IP</strong></em>, and <em><strong>Description</strong></em>.</li><li><strong>Advanced</strong> — Adds <em><strong>IP range</strong></em>, <em><strong>Subnet</strong></em>, <em><strong>VLAN ID</strong></em>, <em><strong>Gateway</strong></em>, <em><strong>Firewall/Zone</strong></em>, <em><strong>DHCP server</strong></em>, and <em><strong>DHCP range</strong></em>.</li></ul></td></tr><tr><td><strong>Import from CSV</strong></td><td>Add IP addresses to the list from a <code>.csv</code> file.</td></tr><tr><td><strong>Export to CSV</strong></td><td>Save the IP addresses of the list to a <code>.csv</code> file.</td></tr><tr><td><strong>Populate from current vault</strong></td><td>Add IP addresses from the entries of the current vault. Available on Windows and macOS.</td></tr><tr><td><strong>Search</strong></td><td>Filter the list by name, host, or description.</td></tr></tbody></table>

**Information - IP/Host**

<table><thead><tr><th width="220">SETTINGS</th><th>DESCRIPTION</th></tr></thead><tbody><tr><td><strong>Name</strong></td><td>Enter a name for the IP address. This field is required.</td></tr><tr><td><strong>Host</strong></td><td>Enter the host name, or choose one from the vault. This field is required.</td></tr><tr><td><strong>IP address</strong></td><td>Enter the IP address.</td></tr><tr><td><strong>Description</strong></td><td>Enter additional information about this IP address.</td></tr><tr><td><strong>IP range</strong></td><td>On the <em><strong>Advanced</strong></em> tab, enter the IP range.</td></tr><tr><td><strong>Subnet</strong></td><td>On the <em><strong>Advanced</strong></em> tab, enter the subnet.</td></tr><tr><td><strong>VLAN ID</strong></td><td>On the <em><strong>Advanced</strong></em> tab, enter the VLAN identifier.</td></tr><tr><td><strong>Gateway</strong></td><td>On the <em><strong>Advanced</strong></em> tab, enter the gateway.</td></tr><tr><td><strong>Firewall/Zone</strong></td><td>On the <em><strong>Advanced</strong></em> tab, enter the firewall or zone.</td></tr><tr><td><strong>DHCP server</strong></td><td>On the <em><strong>Advanced</strong></em> tab, enter the DHCP server.</td></tr><tr><td><strong>DHCP range</strong></td><td>On the <em><strong>Advanced</strong></em> tab, enter the DHCP range.</td></tr></tbody></table>

**Dynamic**

<table><thead><tr><th width="220">SETTINGS</th><th>DESCRIPTION</th></tr></thead><tbody><tr><td><strong>Duplicate check</strong></td><td><p>Choose how entries that share the same host are listed:</p><ul><li><strong>Select first found</strong> — Lists only the first entry found for each host.</li><li><strong>Show all</strong> — Lists every entry, even when several share the same host.</li></ul></td></tr><tr><td><strong>Filter by folder</strong></td><td>Only include the entries of a specific folder.</td></tr><tr><td><strong>Folder</strong></td><td>Select the folder whose entries are included from the list, or click the browse button to choose it. Available when <em><strong>Filter by folder</strong></em> is enabled.</td></tr><tr><td><strong>Filter by tag name</strong></td><td><p>Only include the entries that match specific tags. Click <em><strong>Edit</strong></em> to choose the tags, then use the list under it to choose how the tags are matched:</p><ul><li><strong>and</strong> — Includes the entries that have all the selected tags.</li><li><strong>or</strong> — Includes the entries that have at least one of the selected tags.</li><li><strong>Exclude</strong> — Includes the entries that have none of the selected tags.</li></ul></td></tr></tbody></table>

### See also

* [IP address list entry](https://docs.devolutions.net/rdm/knowledge-base/how-to-articles/ip-address-list-entry.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.devolutions.net/rdm/knowledge-base/knowledge-base-articles/entry-settings/ip-address-list.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
