For the complete documentation index, see llms.txt. This page is also available as Markdown.

Wake on LAN

The Wake on LAN section defines where Remote Desktop Manager sends the Wake-on-LAN magic packet that powers on the host of the entry. The packet is sent to the MAC address set in the asset information of the entry.

Available for session entries. In the entry properties, select Management tools – Wake on LAN. By default, the section is shown only when Show all properties is selected in the entry properties.

Wake on LAN

SETTING
DESCRIPTION

Wake on LAN broadcast IP address

IP address or host name of the network to which the magic packet is sent. When the field is empty or cannot be resolved, the Wake on LAN broadcast IP address of File – Settings – Entry types is used, then 255.255.255.255.

Port

Port used to send the magic packet. When no port is set, the Wake-on-LAN port of File – Settings – Tools is used, which is port 7 by default.

See Wake-on-LAN (WOL) for the requirements, the MAC address discovery and how to send the packet. The global values are described in Entry types and Tools.

Last updated

Was this helpful?