> For the complete documentation index, see [llms.txt](https://docs.devolutions.net/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.devolutions.net/rdm/knowledge-base/knowledge-base-articles/entry-settings/common-settings/password-management.md).

# Password management

Set the password policy, complexity validation and compromised password check of an entry, a folder or a vault in Remote Desktop Manager.

The ***Password management*** section sets the policy that the passwords of an entry must meet and how Remote Desktop Manager validates them when the entry is saved. The policy also applies to the password generator opened from the entry.

Available for session entries, credential entries, folders and the vault. It is not shown for a session entry whose credentials are set to a privileged account. In the entry properties, select ***Security*** – ***Password management***. By default, the section is shown only when ***Show all properties*** is selected in the entry properties.

With [batch edit](https://docs.devolutions.net/rdm/ribbon-menu-bar/edit/batch-edit.md), select ***Override password policies*** to replace these settings on every selected entry.

### Password policy

<table><thead><tr><th width="220">SETTING</th><th>DESCRIPTION</th></tr></thead><tbody><tr><td><em><strong>Policy</strong></em></td><td><p>Defines the password composition rules:</p><ul><li><em><strong>Inherited</strong></em>: the policy of the parent folder, up to the vault. At the vault level, the default policy of the system settings. The policy that applies is shown next to the setting.</li><li><em><strong>System settings</strong></em>: the default policy set in <em><strong>Administration</strong></em> – <em><strong>System settings</strong></em> – <em><strong>Password management</strong></em> – <em><strong>Password policies</strong></em>. Not offered at the vault level.</li><li><em><strong>List</strong></em>: a <a href="https://docs.devolutions.net/rdm/ribbon-menu-bar/administration/templates/password-policies.md">password policy</a> selected in the list that appears. Only policies in <em><strong>Password complexity</strong></em> or <em><strong>Custom characters</strong></em> mode are listed. Offered only when the workspace allows shared password policies.</li><li><em><strong>Custom</strong></em>: the minimum values set in the fields below.</li><li><em><strong>None</strong></em>: no composition rules.</li></ul><p>New entries use <em><strong>Inherited</strong></em>.</p></td></tr><tr><td><em><strong>Minimum length</strong></em></td><td>Minimum number of characters, from 0 to 1024. When the other minimums add up to more than this value, the value is raised to their total.</td></tr><tr><td><em><strong>Minimum lowercase characters</strong></em></td><td>Minimum number of lowercase letters, from 0 to 1024.</td></tr><tr><td><em><strong>Minimum uppercase characters</strong></em></td><td>Minimum number of uppercase letters, from 0 to 1024.</td></tr><tr><td><em><strong>Minimum number of numeric characters</strong></em></td><td>Minimum number of digits, from 0 to 1024.</td></tr><tr><td><em><strong>Minimum symbols</strong></em></td><td>Minimum number of symbols, from 0 to 1024.</td></tr></tbody></table>

The minimum fields can be edited only when ***Policy*** is set to ***Custom***. With the other values, they show the rules of the selected policy. Select the checkbox of a field to set its value.

When ***Lock password policy*** is selected in ***Administration*** – ***System settings*** – ***Password management*** – ***Password policies***, the ***Password policy*** and ***Password validation*** groups are read-only, except for users with the ***Bypass forced default policy*** permission.

### Password validation

<table><thead><tr><th width="220">SETTING</th><th>DESCRIPTION</th></tr></thead><tbody><tr><td><em><strong>Password complexity</strong></em></td><td><p>Defines what happens when the password does not meet the policy:</p><ul><li><em><strong>Inherited</strong></em>: the value of the parent folder, up to the vault. At the vault level, the value of the system settings.</li><li><em><strong>None</strong></em>: the password is not validated.</li><li><em><strong>Required</strong></em>: the entry cannot be saved until the password meets the policy.</li><li><em><strong>Warning</strong></em>: a warning is shown, and the entry can still be saved.</li><li><em><strong>System settings</strong></em>: the value set in <em><strong>Administration</strong></em> – <em><strong>System settings</strong></em> – <em><strong>Password management</strong></em> – <em><strong>Password validation</strong></em>.</li></ul><p>With <em><strong>Inherited</strong></em> and <em><strong>System settings</strong></em>, the value that applies is shown next to the setting.</p></td></tr><tr><td><em><strong>Compromised (pwned) check</strong></em></td><td><p>Defines whether the password is checked against the passwords exposed in data breaches when the entry is saved: <em><strong>Inherited</strong></em>, <em><strong>None</strong></em>, <em><strong>Enabled</strong></em>, <em><strong>Required</strong></em> or <em><strong>System settings</strong></em>. The value that applies is shown next to the setting. <em><strong>Required</strong></em> is offered only when the workspace supports it.</p><p>In a local workspace, the setting is unavailable when <em><strong>Disable compromised password (pwned) check</strong></em> is selected in <em><strong>File</strong></em> – <em><strong>Settings</strong></em> – <em><strong>Entry types</strong></em> – <em><strong>Sessions</strong></em>. See <a href="https://docs.devolutions.net/rdm/knowledge-base/how-to-articles/compromised-pwned-password-check.md">Compromised pwned password check</a>.</p></td></tr></tbody></table>

The workspace-wide values are set in the [Password management](https://docs.devolutions.net/rdm/ribbon-menu-bar/administration/system-settings/password-management.md) section of the system settings. See also [Password management](https://docs.devolutions.net/rdm/concepts/basic-concepts/password-management.md).


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.devolutions.net/rdm/knowledge-base/knowledge-base-articles/entry-settings/common-settings/password-management.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
