Cisco VPN
This article details the many settings and options available for Cisco VPN VPN entries in Remote Desktop Manager.
SETTINGS
DESCRIPTION
Name
The name of the entry.
Folder
The folder where the entry is located.
Display
How the entry is displayed. VPN entries support only the External display mode.
Credentials
The source of the credentials the entry uses.
VPN type
The VPN client the entry uses. Set to Cisco VPN for this entry.
Connection
Profile
The Cisco VPN Client profile used to connect. Select a profile from the list or type its name. Click the refresh button to reload the list of profiles.
Username
The username sent to the Cisco VPN Client. Unavailable when the credentials come from a source other than the entry itself.
Password
The password sent to the Cisco VPN Client. Unavailable when Always ask for password is selected or when the credentials come from a source other than the entry itself.
Always ask for password
Prompts for the Cisco password each time the VPN connects instead of using the saved password.
No certificate password
Connects with the Cisco VPN Client nocertpwd option, so no certificate password is requested.
Accept "Do you wish to continue" prompt
Automatically answers yes to the "Do you wish to continue" prompt of the Cisco VPN Client.
Delay on launch (sec)
The number of seconds (0 to 9999) to wait after the Cisco VPN Client starts before answering the prompt. Available when Accept "Do you wish to continue" prompt is selected.
Wait for exit
Waits for the Cisco VPN Client process to exit, for up to 90 seconds, when connecting and disconnecting, and uses its exit code to determine whether the operation succeeded.
Advanced
Go offline on connection
Switches Remote Desktop Manager to offline mode when the VPN connects.
Close connection after
Closes the VPN connection automatically after the set number of minutes (0 to 4320). The number of minutes can be set when the checkbox is selected.
Detect reachable host in wait
Checks whether the host is reachable while waiting for the VPN connection.
VPN reconnect mode
Defines what happens to the VPN when the connection is interrupted:
Default — uses the VPN reconnect mode set in File – Settings – Entry types – VPN/tunnel/gateway.
Reconnect VPN
Leave VPN open
Go online on disconnect after
Switches Remote Desktop Manager back online the set number of seconds (0 to 180) after the VPN disconnects.
Use adapter to detect connection
Uses the network adapter to detect whether the VPN connection is open.
After execution, wait
Defines how Remote Desktop Manager waits after starting the VPN:
Delay — waits for the set number of seconds (-1 to 180).
For IP on adapter — waits for an IP address on the network adapter entered in the adapter field (adapter name, device name, or blank). Wait a maximum of sets the maximum wait in seconds (-1 to 180), and Then delay adds a delay in milliseconds (-1 to 180000) once the IP address is detected.
Commands
The list of VPN commands, with their Name, After connection command, and Before disconnecting command. Use the toolbar to Add, Edit, Delete, Move up, or Move down a command. Available when After execution, wait is set to For IP on adapter.
After connecting, VPN command enabled
Runs the after connection commands once the VPN connects. Available when After execution, wait is set to For IP on adapter.
Before disconnecting, VPN command enabled
Runs the before disconnecting commands before the VPN disconnects. Available when After execution, wait is set to For IP on adapter.
Run routes in batch (forces elevated privileges)
Runs the route commands in a batch, which requires elevated privileges. Available when After execution, wait is set to For IP on adapter.
Last updated
Was this helpful?