> For the complete documentation index, see [llms.txt](https://docs.devolutions.net/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.devolutions.net/powershell/da/powershell-commands/set-rdmentry.md).

# Set-RDMEntry

Set-RDMEntry gemmer ændringer til en eksisterende Remote Desktop Manager post hentet via Get-RDMEntry eller New-RDMEntry.

### Synopsis

Gem posten.

### Syntaks

#### \_\_AllParameterSets

```
Set-RDMEntry [-InputObject] <PSConnection[]> [-PassThru] [-Refresh] [-VaultMode <VaultMode>]
 [-ForcePromptAnswer <DialogResult[]>] [-WhatIf] [-Confirm] [<CommonParameters>]
```

### Description

Gem posten. Posten skal være hentet via Get-RDMEntry cmdlet eller via New-RDMEntry cmdlet. I system boks, understøttet typer er limited til Gruppe, Contact, SessionTool, og VPN. Denne cmdlet kan ikke være brugt at flytte en post til en anden boks. Til gør så, brug Move-RDMEntry cmdlet. Brugeren skal have rettighederne til at tilføje eller edit posten. I system boks, brugeren skal være en administator.

### Eksempler

#### Eksempel 1

```powershell
PS C:\> $folder = New-RDMEntry -Name 'New Folder' -Type 'Group';
        $folder.GroupDetails.UserName = 'MyUserName';
        $folder.GroupDetails.Domain = 'MyDomain';
        $folder = Set-RDMEntry -InputObject $folder -PassThru
```

Opret en ny post uden saving den og store den i $folder. Add nogle additionnal oplysning i GroupDetails. Save posten i aktuelle boks og store den i $folder.

#### Eksempel 2

```powershell
PS C:\> $entries = Get-RDMEntry -Name Entry?;
    $entries | ForEach-Object { $_.Name = '[Deprecated]' + $_.Name };
    $entries | Set-RDMEntry -Reresh
```

Gem alle poster hvis navn er Post followed af et tegn. Append '\[Forældet]' til deres navn og gem ændringerne. Switchen Refresh bruges at sørger fo subsequent kommandoer er applied på ændret poster.

### Parametre

#### -Confirm

Beder Dem om bekræftelse, før cmdlet'en køres.

```yaml
Type: System.Management.Automation.SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases:
- cf
ParameterSets:
- Name: (All)
  Position: Named
  IsRequired: false
  ValueFromPipeline: false
  ValueFromPipelineByPropertyName: false
  ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
```

#### -ForcePromptAnswer

Switch, der skal bruges med forsigtighed. Den besvarer automatisk prompter med spørgsmålene yes/no, yes/no/cancel eller ok/cancel. Ved flere prompter kan der sendes flere værdier til denne parameter. Følgende værdier accepteres:

* Yes: Acceptér prompten. Dækker værdierne OK og Automatic.
* No: Afvis prompten yes/no/cancel. "Cancel" er reserveværdien, hvis der ikke findes en "No"-værdi.
* Cancel: Annuller prompten yes/no/cancel. "No" er reserveværdien, hvis der ikke findes en "Cancel"-værdi.

```yaml
Type: System.Windows.Forms.DialogResult[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
  Position: Named
  IsRequired: false
  ValueFromPipeline: false
  ValueFromPipelineByPropertyName: false
  ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
```

#### -InputObject

PSConnection\[] objekt retrieved fra Get-RDMEntry eller oprettet via New-RDMEntry.

```yaml
Type: RemoteDesktopManager.PowerShellModule.PSOutputObject.PSConnection[]
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
  Position: 0
  IsRequired: true
  ValueFromPipeline: true
  ValueFromPipelineByPropertyName: false
  ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
```

#### -PassThru

Returner alle gemt poster som en PSConnection\[].

```yaml
Type: System.Management.Automation.SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
  Position: Named
  IsRequired: false
  ValueFromPipeline: false
  ValueFromPipelineByPropertyName: false
  ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
```

#### -Refresh

Opdater poster i boksen. Alle poster af type 'Gruppe' automatisk trigger en refresh at sørger fo de er tilgængelig for anden poster. For ændring i bulk, brug Update-RDMEntries efter ændringerne i stedet for denne switch.

```yaml
Type: System.Management.Automation.SwitchParameter
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
  Position: Named
  IsRequired: false
  ValueFromPipeline: false
  ValueFromPipelineByPropertyName: false
  ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
```

#### -VaultMode

Boks, som kommandoen anvendes på. Der er tre valg:

* Default: Den aktuelle boks, der er angivet.
* User: Boks, der er specifik for den aktuelle bruger.
* Global: Arbejdsområdets globale boks.

```yaml
Type: Devolutions.RemoteDesktopManager.VaultMode
DefaultValue: ''
SupportsWildcards: false
Aliases: []
ParameterSets:
- Name: (All)
  Position: Named
  IsRequired: false
  ValueFromPipeline: false
  ValueFromPipelineByPropertyName: false
  ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
```

#### -WhatIf

Viser, hvad der ville ske, hvis cmdlet'en kørte. Cmdlet'en køres ikke.

```yaml
Type: System.Management.Automation.SwitchParameter
DefaultValue: False
SupportsWildcards: false
Aliases:
- wi
ParameterSets:
- Name: (All)
  Position: Named
  IsRequired: false
  ValueFromPipeline: false
  ValueFromPipelineByPropertyName: false
  ValueFromRemainingArguments: false
DontShow: false
AcceptedValues: []
HelpMessage: ''
```

#### CommonParameters

Denne cmdlet understøtter de almindelige parametre: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction og -WarningVariable. Yderligere oplysninger finder De i [about\_CommonParameters](https://go.microsoft.com/fwlink/?LinkID=113216).

### Input

#### RemoteDesktopManager.PowerShellModule.PSOutputObject.PSConnection

Poster at gemme hentet fra Get-RDMEntry eller New-RDMEntry

### Noter

Yderligere oplysninger får De ved at skrive "Get-Help Set-RDMEntry -detailed". Tekniske oplysninger får De ved at skrive "Get-Help Set-RDMEntry -full".


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.devolutions.net/powershell/da/powershell-commands/set-rdmentry.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.