> For the complete documentation index, see [llms.txt](https://docs.devolutions.net/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.devolutions.net/powershell-universal/de/powershell-befehle/new-udnivochart.md). # New-UDNivoChart New-UDNivoChart rendert Nivo-basierte Datenvisualisierungen in PowerShell Universal, einschließlich Balken-, Linien-, Kreis-, Heatmap-, Radial- und Netzwerkdiagrammtypen. ### Synopsis Erstellt ein neues Nivo-Diagramm. ### Syntax ```powershell New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-BorderWidth ] [-BorderColor ] [-MaxValue ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-StartAngle ] [-EndAngle ] [-InnerRadius ] [-PadAngle ] [-CornerRadius ] [-RadialBar] [-DisableTracks] [-TracksColor ] [-DisableRadialGrid] [-DisableCircularGird] [-RadialAxisStart ] [-RadialAxisEnd ] [-CircluarAxisInner ] [-CircularAxisOuter ] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-BorderWidth ] [-BorderColor ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-DisableAnimations] [-DisableLabels] [-Identity ] [-Value ] [-LeavesOnly] [-CirclePacking] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-BorderWidth ] [-BorderColor ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-InnerPadding ] [-DisableLabel] [-Treemap] [-Identity ] [-Value ] [-Tile ] [-LeavesOnly] [-OuterPadding ] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-BorderWidth ] [-BorderColor ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-EnableGridX] [-GridXValues ] [-EnableGridY] [-GridYValues ] [-DisableAnimations] [-Keys ] [-DotSize ] [-DotBorderWidth ] [-DisableStackTooltip] [-AxisTop ] [-AxisBottom ] [-AxisLeft ] [-AxisRight ] -Stream [-OffsetType ] [-Order ] [-Curve ] [-FillOpactiy ] [-DotColor ] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-BorderWidth ] [-BorderColor ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-DisableAnimations] -Pie [-StartAngle ] [-EndAngle ] [-Fit ] [-InnerRadius ] [-PadAngle ] [-CornerRadius ] [-SortByValue] [-DisableRadiusLabels] [-RadiusLabelSkipAngle ] [-RadiusLabelsLinkOffset ] [-RadialLabelsLinkDiagonalLength ] [-RadialLabelsLinkHorizontalLength ] [-RadialLabelsTextXOffset ] [-RadialLabelsLinkStrokeWidth ] [-DisableSliceLabels] [-DisableArcLinkLabels] [-ArcLinkLabel ] [-DisableArcLabels] [-SlicesLabelsSkipAngle ] [-SlicesLabelsTextColor ] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-BorderWidth ] [-BorderColor ] [-IndexBy ] [-MinValue ] [-MaxValue ] [-Padding ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-LabelSkipWidth ] [-LabelSkipHeight ] [-LabelTextColor ] [-EnableGridX] [-GridXValues ] [-EnableGridY] [-GridYValues ] [-DisableAnimations] -Keys [-Layers ] [-AxisTop ] [-AxisBottom ] [-AxisLeft ] [-AxisRight ] [-Bar] [-GroupMode ] [-Layout ] [-Reverse] [-InnerPadding ] [-BorderRadius ] [-DisableLabel] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-IndexBy ] [-MinValue ] [-MaxValue ] [-Padding ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-LabelSkipWidth ] [-LabelSkipHeight ] [-LabelTextColor ] [-EnableGridX] [-GridXValues ] [-EnableGridY] [-GridYValues ] [-DisableAnimations] [-Keys ] [-CellOpacity ] [-CellBorderWidth ] [-Heatmap] [-ForceSquare] [-SizeVariation ] [-DisableLabels] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-MinValue ] [-MaxValue ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] -Calendar -From -To [-EmptyColor ] [-YearSpacing ] [-YearLegendOffset ] [-MonthSpacing ] [-MonthLegendOffset ] [-DaySpacing ] [-DayLegendOffset ] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-EnableGridX] [-GridXValues ] [-EnableGridY] [-GridYValues ] [-Layers ] [-DotSize ] [-DotBorderWidth ] [-DisableStackTooltip] [-AxisTop ] [-AxisBottom ] [-AxisLeft ] [-AxisRight ] -Line [-LineWidth ] [-EnableArea] [-AreaBaselineValue ] [-AreaOpacity ] [-AreaBlendMode ] [-DisableDots] [-EnableDotLabel] [-DotLabelYOffset ] [-YScaleStacked] [-YScaleMin ] [-YScaleMax ] [-Curve ] [] New-UDNivoChart [-Id ] -Data [-Definitions ] [-Fill ] [-Theme ] [-MotionConfig ] [-Responsive] [-Width ] [-Height ] [-Colors ] [-ColorBy ] [-UseDataColor] [-DisableInteractive] [-OnClick ] [-MarginTop ] [-MarginRight ] [-MarginBottom ] [-MarginLeft ] [-Network] [-LinkDistance ] [-CenteringStrength ] [-Repulsivity ] [-DistanceMin ] [-DistanceMax ] [-Iterations ] [-NodeColor ] [-NodeBorderColor ] [-LinkThickness ] [-LinkColor ] [-LinkBlendMode ] [] ``` ### Beschreibung Erstellt ein neues Nivo-Diagramm. ### Parameter #### -Id Die ID des Diagramms. ``` Required? false Position? named Default value (New-Guid).ToString() Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Data Die im Diagramm anzuzeigenden Daten. ``` Required? true Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Definitions Muster und Farbverläufe definieren. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Fill Regeln zum Anwenden von Mustern und Farbverläufen definieren ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Theme Stil für gängige Elemente wie Beschriftungen, Achsen usw. definieren. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MotionConfig ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -BorderWidth Breite des Balken-, Kreis- oder Stream-Rands. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -BorderColor Farbe des Balken-, Kreis- oder Stream-Rands. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -IndexBy Schlüssel, der zum Indizieren der Daten verwendet wird. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MinValue Minimalwert. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MaxValue Maximalwert. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Padding Abstand zwischen den einzelnen Teilen des Diagramms. (Verhältnis). ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Responsive Erstellt ein responsives Diagramm. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Width Breite des Diagramms. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Height Höhe des Diagramms. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Colors Farben des Diagramms definieren. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -ColorBy Eigenschaft, die zur Bestimmung der Knotenfarbe verwendet wird. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -UseDataColor Datenfarbe verwenden. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableInteractive Deaktiviert interaktive Funktionen. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -OnClick Skriptblock, der ausgeführt wird, wenn auf das Diagramm geklickt wird. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MarginTop Oberer Rand des Diagramms. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MarginRight Rechter Rand des Diagramms. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MarginBottom Unterer Rand des Diagramms. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MarginLeft Linker Rand des Diagramms. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LabelSkipWidth Beschriftung überspringen, wenn die Balkenbreite kleiner als der angegebene Wert ist; wird bei 0 ignoriert. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LabelSkipHeight Beschriftung überspringen, wenn die Balkenhöhe kleiner als der angegebene Wert ist; wird bei 0 ignoriert. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LabelTextColor Definiert, wie die Textfarbe der Beschriftung berechnet wird. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -EnableGridX X-Gitter aktivieren/deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -GridXValues \ Werte angeben, die für vertikale Gitterlinien verwendet werden. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -EnableGridY Y-Gitter aktivieren/deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -GridYValues \ Werte angeben, die für horizontale Gitterlinien verwendet werden. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableAnimations Animationen deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Keys \ Schlüssel zur Bestimmung jeder Serie. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Layers \ Definiert die Reihenfolge der Ebenen. Standard @('grid', 'axes', 'bars', 'totals', 'markers', 'legends', 'annotations') ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DotSize Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DotBorderWidth Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableStackTooltip Parameterbeschreibung ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -AxisTop Konfiguration der oberen Achse. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -AxisBottom Konfiguration der unteren Achse. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -AxisLeft Konfiguration der linken Achse. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -AxisRight Konfiguration der rechten Achse. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Bar Erstellt ein Balkendiagramm. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -GroupMode Wie Balken gruppiert werden. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Layout Wie Balken angezeigt werden. Standard ist 'vertical'. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Reverse Balken umkehren; beginnt beim vertikalen Layout oben statt unten und beim horizontalen rechts statt links. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -InnerPadding Abstand zwischen gruppierten/gestapelten Balken. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -BorderRadius Eckenradius des Rechtecks. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableLabel Beschriftungen aktivieren/deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Calendar Erstellt ein Kalenderdiagramm. ``` Required? true Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -From Startdatum. ``` Required? true Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -To Enddatum. ``` Required? true Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -EmptyColor Farbe zum Füllen von Tagen ohne verfügbaren Wert. Standard ist '#fff'. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -YearSpacing Abstand zwischen den einzelnen Jahreszeilen/-spalten je nach Richtung definieren. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -YearLegendOffset Abstand vom Jahresrand zu seiner Beschriftung definieren. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MonthSpacing Abstand zwischen den einzelnen Monatszeilen/-spalten je nach Richtung definieren. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -MonthLegendOffset Abstand vom Monatsrand zu seiner Beschriftung definieren. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DaySpacing Definiert den Abstand zwischen den einzelnen Tageszellen. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DayLegendOffset Definiert den Versatz von der Tageszelle zu ihrer Beschriftung. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -CellOpacity Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -CellBorderWidth Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Heatmap Erstellt ein Heatmap-Diagramm. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -ForceSquare Quadratische Zellen erzwingen (Breite = Höhe), bitte beachten Sie, dass Padding ignoriert wird. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -SizeVariation Optional die Größe der Zellen je nach ihrem Wert variieren lassen. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableLabels Beschriftungen deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Line Erstellt ein Liniendiagramm ``` Required? true Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LineWidth Linienbreite. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -EnableArea Fläche unter jeder Linie aktivieren/deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -AreaBaselineValue Definiert den Wert, der für die Flächen-Basislinie verwendet werden soll. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -AreaOpacity Flächendeckkraft (0\~1), hängt von enableArea ab. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -AreaBlendMode Definiert CSS mix-blend-mode für Flächen. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableDots Deaktiviert Punkte. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -EnableDotLabel Punktbeschriftungen aktivieren/deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DotLabelYOffset Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -YScaleStacked Parameterbeschreibung ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -YScaleMin Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -YScaleMax Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Pie Erstellt ein Kreisdiagramm. ``` Required? true Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -StartAngle Startwinkel (in Grad), nützlich zum Beispiel für die Erstellung von Messanzeigen. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -EndAngle Endwinkel (in Grad), nützlich zum Beispiel für die Erstellung von Messanzeigen. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Fit Falls angegeben, wird das Kreisdiagramm optimiert, um bei Verwendung eines Teilkreises mehr Platz einzunehmen. ``` Required? false Position? named Default value True Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -InnerRadius Ringdiagramm, wenn größer als 0. Der Wert sollte zwischen 0\~1 liegen, da es sich um ein Verhältnis zum ursprünglichen Radius handelt. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -PadAngle Abstand zwischen den einzelnen Kreissegmenten. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -CornerRadius Abgerundete Segmente. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -SortByValue Falls angegeben, werden die Bögen entsprechend ihrem zugeordneten Wert sortiert. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableRadiusLabels Bogenbeschriftungen aktivieren/deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadiusLabelSkipAngle Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadiusLabelsLinkOffset Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadialLabelsLinkDiagonalLength Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadialLabelsLinkHorizontalLength Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadialLabelsTextXOffset Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadialLabelsLinkStrokeWidth Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableSliceLabels Parameterbeschreibung ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableArcLinkLabels Bogenbeschriftungen aktivieren/deaktivieren. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -ArcLinkLabel Bogen-Link-Beschriftung. Standard ist 'id'. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableArcLabels Deaktiviert Bogenbeschriftungen. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -SlicesLabelsSkipAngle Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -SlicesLabelsTextColor Parameterbeschreibung ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Stream Erstellt ein Stream-Diagramm. ``` Required? true Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -OffsetType Offset-Typ. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Order Ebenenreihenfolge. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Curve Kurveninterpolation. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -FillOpactiy Füllungsdeckkraft der Ebenen. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DotColor Parameterbeschreibung ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Treemap Erstellt ein Treemap-Diagramm. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Identity Der Schlüssel, der zum Abrufen der Identität von Knoten verwendet wird. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Value Der Schlüssel, der zum Abrufen des Werts von Knoten verwendet wird. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Tile Strategie zur Berechnung der Knoten. Standard ist 'squarify'. ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LeavesOnly Nur Blattknoten rendern (ohne übergeordnete Knoten). ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -OuterPadding Abstand zwischen übergeordnetem und untergeordnetem Knoten. ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -CirclePacking Erstellt ein Circle-Packing-Diagramm. ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Network region Network ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LinkDistance ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -CenteringStrength ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Repulsivity ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DistanceMin ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DistanceMax ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -Iterations ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -NodeColor ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -NodeBorderColor ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LinkThickness ``` Required? false Position? named Default value 0 Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LinkColor ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -LinkBlendMode ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadialBar region Radial Bar ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableTracks ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -TracksColor ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableRadialGrid ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -DisableCircularGird ``` Required? false Position? named Default value False Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadialAxisStart ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -RadialAxisEnd ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -CircluarAxisInner ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### -CircularAxisOuter endregion ``` Required? false Position? named Default value Accept pipeline input? false Aliases Accept wildcard characters? false ``` #### Allgemeine Parameter Dieses Cmdlet unterstützt die allgemeinen Parameter: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable und OutVariable. Weitere Informationen finden Sie unter [about\_CommonParameters](https://go.microsoft.com/fwlink/?LinkID=113216). ### Ausgaben ### Beispiele #### Beispiel 1: Balkenmenü ```powershell $Data = 1..10 | ForEach-Object { $item = Get-Random -Max 1000 [PSCustomObject]@{ Name = "Test$item" Value = $item } } New-UDNivoChart -Bar -Keys "value" -IndexBy 'name' -Data $Data -Height 500 -Width 1000 ``` Erstellt ein einfaches Balkendiagramm. #### Beispiel 2: Muster ```powershell $Data = @( @{ country = 'USA' burgers = (Get-Random -Minimum 10 -Maximum 100) fries = (Get-Random -Minimum 10 -Maximum 100) sandwich = (Get-Random -Minimum 10 -Maximum 100) } @{ country = 'Germany' burgers = (Get-Random -Minimum 10 -Maximum 100) fries = (Get-Random -Minimum 10 -Maximum 100) sandwich = (Get-Random -Minimum 10 -Maximum 100) } @{ country = 'Japan' burgers = (Get-Random -Minimum 10 -Maximum 100) fries = (Get-Random -Minimum 10 -Maximum 100) sandwich = (Get-Random -Minimum 10 -Maximum 100) } ) $Pattern = New-UDNivoPattern -Dots -Id 'dots' -Background "inherit" -Color "#38bcb2" -Size 4 -Padding 1 -Stagger $Fill = New-UDNivoFill -ElementId "fries" -PatternId 'dots' New-UDNivoChart -Definitions $Pattern -Fill $Fill -Bar -Data $Data -Height 400 -Width 900 -Keys @('burgers', 'fries', 'sandwich') -IndexBy 'country' ``` Erstellt ein Balkendiagramm mit Mustern. #### Beispiel 3: OnClick ```powershell $Data = @( @{ country = 'USA' burgers = (Get-Random -Minimum 10 -Maximum 100) fries = (Get-Random -Minimum 10 -Maximum 100) sandwich = (Get-Random -Minimum 10 -Maximum 100) } @{ country = 'Germany' burgers = (Get-Random -Minimum 10 -Maximum 100) fries = (Get-Random -Minimum 10 -Maximum 100) sandwich = (Get-Random -Minimum 10 -Maximum 100) } @{ country = 'Japan' burgers = (Get-Random -Minimum 10 -Maximum 100) fries = (Get-Random -Minimum 10 -Maximum 100) sandwich = (Get-Random -Minimum 10 -Maximum 100) } ) New-UDNivoChart -Bar -Data $Data -Height 400 -Width 900 -Keys @('burgers', 'fries', 'sandwich') -IndexBy 'country' -OnClick { Show-UDToast -Message $Body -Position topLeft } ``` Erstellt ein Balkendiagramm mit einem OnClick-Ereignishandler. #### Beispiel 4: Blasendiagramm ```powershell $TreeData = @{ Name = "root" children = @( @{ Name = "first" children = @( @{ Name = "first-first" Count = 7 } @{ Name = "first-second" Count = 8 } ) }, @{ Name = "second" Count = 21 } ) } New-UDNivoChart -Bubble -Data $TreeData -Value "count" -Identity "name" -Height 500 -Width 800 ``` Erstellt ein einfaches Blasendiagramm. #### Beispiel 5: Kalenderdiagramm ```powershell $Data = @() for($i = 365; $i -gt 0; $i--) { $Data += @{ day = (Get-Date).AddDays($i * -1).ToString("yyyy-MM-dd") value = Get-Random } } $From = (Get-Date).AddDays(-365) $To = Get-Date New-UDNivoChart -Calendar -Data $Data -From $From -To $To -Height 500 -Width 1000 -MarginTop 50 -MarginRight 130 -MarginBottom 50 -MarginLeft 60 ``` Erstellt ein einfaches Kalenderdiagramm. #### Beispiel 6: Radiales Balkendiagramm ```powershell $Data = @( [PSCustomObject]@{ id = "Supermarket" data = @( @{ "x" = "meat"; "y" = 10 } @{ "x" = "fish"; "y" = 20 } @{ "x" = "milk"; "y" = 30 } ) } [PSCustomObject]@{ id = "Gas station" data = @( @{ "x" = "meat"; "y" = 20 } @{ "x" = "fish"; "y" = 30 } @{ "x" = "milk"; "y" = 40 } ) } [PSCustomObject]@{ id = "Restaurant" data = @( @{ "x" = "meat"; "y" = 30 } @{ "x" = "fish"; "y" = 40 } @{ "x" = "milk"; "y" = 50 } ) } ) New-UDNivoChart -RadialBar -Data $Data -Height 370 -Responsive -MarginLeft 150 -MarginTop 1 ``` Erstellt ein einfaches radiales Balkendiagramm. #### Beispiel 7: Stream-Diagramm ```powershell $Data = 1..10 | ForEach-Object { @{ "Adam" = Get-Random "Alon" = Get-Random "Lee" = Get-Random "Frank" = Get-Random "Bill" = Get-Random } } New-UDNivoChart -Stream -Data $Data -Height 500 -Width 1000 -Keys @("adam", "alon", "lee", "frank", "bill") ``` Erstellt ein einfaches Stream-Diagramm. #### Beispiel 8: Heatmap-Diagramm ```powershell $Data = @( @{ state = "idaho" cats = 72307 dogs = 23429 moose = 23423 bears = 784 } @{ state = "wisconsin" cats = 2343342 dogs = 3453623 moose = 1 bears = 23423 } @{ state = "montana" cats = 9234 dogs = 3973457 moose = 23472 bears = 347303 } @{ state = "colorado" cats = 345973789 dogs = 0237234 moose = 2302 bears = 2349772 } ) New-UDNivoChart -Heatmap -Data $Data -IndexBy 'state' -keys @('cats', 'dogs', 'moose', 'bears') -Height 500 -Width 1000 -MarginTop 50 -MarginRight 130 -MarginBottom 50 -MarginLeft 60 ``` Erstellt ein einfaches Heatmap-Diagramm. #### Beispiel 9: Farbbasierte Daten ```powershell $Data = $([PSCustomObject]@{ value = 30 color = '#BF5290' } [PSCustomObject]@{ value = 100 color = '#52BE80' } ) New-UDNivoChart -Pie -Data ($Data | Where-Object { $_.Value -ne 0 }) -InnerRadius 0.7 -CornerRadius 5 -PadAngle 1 -Colors @{datum = 'data.color' }` -MarginLeft "150" -MarginTop 1 -Height 370 -Responsive ``` Erstellt ein Kreisdiagramm mit farbbasierten Daten. --- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter: ``` GET https://docs.devolutions.net/powershell-universal/de/powershell-befehle/new-udnivochart.md?ask=&goal= ``` `ask` is the immediate question: it should be specific, self-contained, and written in natural language. `goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.